KTM 950 Wheel Bearing R&R

Parts Needed:


(2) 6906 bearings

(2) 35x47x7 seals

60009013000 spacer r/s

60009012000 spacer l/s



(2) 6205 bearings

3206 bearing {2006 and newer use (2) 6006 bearings}

30x52x7 seal brake side

7206AVH seal sprocket side {2006 and newer use 6006AV}

60010013000 spacer r/s {2006 and newer use 60110013000}

60010012000 spacer l/s {2006 and newer use 60110012000}

NOTE: 2006 and newer models use a different rear hub and sprocket support


I also suggest replacing:

(6) 54610459000 damping rubbers


Parts suppliers:





Disclaimer: The information contained on this page and on this site is condensed from the combined wisdom of the members and contributors of the Orange Crush Forum. The contributions are reprinted here exactly as posted by the contributors. The spelling, syntax, grammar, etc have purposely not been corrected in order to retain its original flavor. The contributors are from throughout the World, and English may very well not be their native language. Don't be an ass and complain about the lexicon. It is mostly subjective, with a little objectivity thrown in for seasoning, based on the experiences of the contributors. Use this info at your own risk. The site owner is not responsible for its accuracy or validity. None of the procedures described should be taken as recommendations by anyone. Take anything you read or hear anywhere, but especially on the World Wide Web with a very large dose of salt. The cognoscente is a skeptic.